Basic Unit - Use the jug knife to split jugs in the tank, add water and send to the drone! This system will keep the chemical mixed and allow you to rinse out the jugs and the tank between uses. You can also rinse off the drone using the 10 ft utility hose!

This unit allows you to either split jugs into the tank or pull chemical in from a single bulk source (barrel, tote, etc.) into the tank, add water, then send the mix to the drone.  With this option, there is no chemical metering and the user relies on markings on the barrel or tote. This is an excellent system if you only occasionally pull from a bulk source!

The same great unit allowing you to pull chemical or water in from a second bulk source and measure as you fill with our reliable standard meter.

This unit also pulls chemical from a single bulk source but uses an Oval Gear Meter.  These meters are accurate to with 0.1% and do NOT require calibration. Excellent system for spraying as effectively as possible pulling chemical from a bulk source!

This option allows the user to select chemical from up to 3 bulk sources with a turn of a valve.  The chemical is then pulled through the meter and into the tank. This is great for attaching multiple bulk chemical sources and water sources!